Saturday, October 4, 2008

Part 5 - Upgrade Actiontec M1000 Firmware QA02

If you are using an Actiontec M1000, you need to verify the current Firm Ware version on your devise.

If your welcome screen on the Actiontec M1000 doesn't look like the picture below, you likely need to upgrade your firmware.

QA02+ is required in order to make your Actiontec M1000 work properly with this configuration.

Instructions and Firmware Update can be found at the following page for the Actiontec M1000:
http://www.qwest.com/internethelp/modems/m1000/index.html?option=drivers

(Note: Make sure you grab the recovery and the recovery utility just in case and write down your PPP user name and password.)

No comments: